Double Girder EOT Cranes
Heavy-duty overhead cranes for higher capacities, longer spans and demanding duty cycles — up to 75 t and 35 m.
- Capacity
- Up to 75 t
- Span
- Up to 35 m
- Duty class
- Up to M7
What is a double girder EOT crane?
A double girder EOT crane uses two bridge girders with a crab (trolley) running on rails on top of the girders. This arrangement supports higher capacities, longer spans and heavier duty cycles, and provides greater hook height than a single girder crane.
LiftoMech double girder cranes are built for continuous production environments — steel, heavy engineering, power and infrastructure — and are available up to 75 tonnes, 35 m span and M7 duty class.
LiftoMech double girder EOT crane, 7.5/5 t SWL, 23.1 m span
Where it is used
Typical applications and industries. Our engineers will confirm suitability for your specific process.
- Steel plants and rolling mills
- Heavy fabrication and engineering
- Power plant turbine halls
- Foundries and forging shops
- Precast and infrastructure
- Paper, sugar and process plants
Designed for safe, reliable lifting
Higher capacity
Configurations up to 75 t safe working load.
Long spans
Box girder designs up to 35 m span.
Heavy duty cycles
Mechanisms selected for duty classes up to M7.
Maximum hook height
Crab on top of girders gives better use of building height.
Auxiliary hoist option
Main and auxiliary hoists (e.g. 7.5/5 t) on one crab.
Maintenance access
Walkways and platforms on the bridge for safe servicing.
Configured around your requirement
Every crane is engineered to order. These are the main choices we work through with you.
Crab / trolley
Open winch crab or double girder hoist trolley, with optional auxiliary hoist.
Girder design
Fabricated box girders designed for deflection limits and fatigue.
Drives
Slip-ring or squirrel cage motors with VFD control for all motions.
Operation
Pendant, radio remote, or operator cabin with ergonomic controls.
Specification overview
Final specifications are confirmed in our technical offer, based on your application data.
| Parameter | Value |
|---|---|
| Lifting capacity | Up to 75 t Confirmed |
| Span | Up to 35 m Confirmed |
| Duty class (IS 3177) | Up to M7 Confirmed |
| Lifting height | [Confirm] as per application |
| Auxiliary hoist | Available Configurable |
| Hoisting speed | [Confirm] single / dual / VFD |
| Cross travel speed | [Confirm] |
| Long travel speed | [Confirm] |
| Power supply | [Confirm] 415 V, 3 Ph, 50 Hz typical |
| Operating environment | Indoor / outdoor / high temperature Configurable |
Standard components
Configured with components from leading international manufacturers, for reliable operation and readily available spares.
Geared motors and drive units for hoist, cross-travel and long-travel motions.
Helical and bevel gearmotors for smooth, high-duty crane travel drives.
Wire rope and electric chain hoists rated for standard and heavy duty.
VFDs, motors and contactors for precise crane speed control.
PLCs, HMIs and drives for crane logic, safety and remote control.
Switchgear, protection and panel components for crane power systems.
Options to suit your operation
Add safety, control and productivity features to match your duty and site conditions.
- VFD control on all motions
- Operator cabin (open / closed / AC)
- Radio remote control
- Load cell with display
- Anti-collision system
- Rotating hook / special hooks
- Below-the-hook attachments
- Bus bar or cable reel power feed
Supported from commissioning onwards
Our own teams install and service LiftoMech cranes, so responsibility stays with one supplier.
Application review
Load, span, duty and building data reviewed by our engineers.
Design & manufacture
Drawings for approval, fabrication and stage-wise inspection.
Installation & testing
Erection, alignment, load test and handover documentation.
Service & AMC
Preventive maintenance, breakdown support and spares.
What is the maximum capacity you manufacture?
What duty classes do you design for?
Can you supply cranes with main and auxiliary hoists?
Do you supply cranes for steel plants?
Enquire about Double Girder EOT Cranes
Share as much as you know. Our sales engineers will review your application and respond with a suitable configuration and quotation.
Thank you. Your enquiry has been received.
Our sales engineering team will review your requirement and get in touch within one working day. For urgent requirements, call Sales on +91 91300 28066.
Demo mode: no form backend is connected yet, so this submission was not sent. Configure FORM_ENDPOINT in assets/js/site.js — see DEPLOYMENT.md.
Explore other lifting solutions
Single Girder EOT Cranes
Space-efficient overhead cranes for light to medium duty lifting in workshops, assembly lines and warehouses.
View Details
Goliath & Gantry Cranes
Rail-mounted cranes for open yards, precast plants and shop floors without overhead runway structures.
View Details
Jib Cranes
Pillar and wall-mounted jib cranes for localised lifting at workstations, machine tools and loading points.
View Details