Goliath & Gantry Cranes
Rail-mounted cranes for open yards, precast plants and shop floors without overhead runway structures.
- Type
- Full / semi gantry
- Girder
- Single / double
- Use
- Indoor / outdoor
What is a goliath & gantry crane?
Goliath and gantry cranes run on rails at floor level, with legs supporting the bridge. They are used where an overhead runway is not available or practical — in open stockyards, casting yards, precast plants and in buildings not designed for crane loads.
LiftoMech supplies full gantry, semi-gantry and cantilever configurations in single and double girder designs, engineered for wind, site conditions and the loads being handled.
GEW Cranes 16 t double girder goliath crane at an infrastructure precast site
Where it is used
Typical applications and industries. Our engineers will confirm suitability for your specific process.
- Precast and casting yards
- Metro and bridge segment handling
- Steel stockyards
- Shipping and container yards
- Shop floors without runway columns
- Material storage yards
Designed for safe, reliable lifting
No runway structure needed
Reduces civil and building cost.
Outdoor ready
Designed for wind loads with rail clamps and weather protection.
Flexible layouts
Cantilevers extend coverage beyond the rail span.
Single or double girder
Matched to capacity and hook height needs.
Relocatable options
Bolted construction for re-use on new sites.
Rugged construction
Box section legs and sill beams for stability.
Configured around your requirement
Every crane is engineered to order. These are the main choices we work through with you.
Gantry type
Full gantry, semi-gantry, or cantilever goliath.
Girder
Single girder with hoist, or double girder with crab.
Travel
Rail-mounted with motorised long travel; cable reel or DSL power feed.
Protection
Storm locks, rail clamps, anemometer and rain covers for outdoor duty.
Specification overview
Final specifications are confirmed in our technical offer, based on your application data.
| Parameter | Value |
|---|---|
| Lifting capacity | [Confirm] range — up to 75 t company maximum |
| Span | [Confirm] range — company maximum 35 m |
| Cantilever | One or both sides Configurable |
| Lifting height | [Confirm] as per application |
| Duty class (IS 3177) | Up to M7 Configurable |
| Wind design | [Confirm] as per site / IS 875 |
| Travel speeds | [Confirm] |
| Power feed | Cable reel / DSL / festoon Configurable |
Standard components
Configured with components from leading international manufacturers, for reliable operation and readily available spares.
Geared motors and drive units for hoist, cross-travel and long-travel motions.
Helical and bevel gearmotors for smooth, high-duty crane travel drives.
Wire rope and electric chain hoists rated for standard and heavy duty.
VFDs, motors and contactors for precise crane speed control.
PLCs, HMIs and drives for crane logic, safety and remote control.
Switchgear, protection and panel components for crane power systems.
Options to suit your operation
Add safety, control and productivity features to match your duty and site conditions.
- Cable reel drum
- Anemometer with alarm
- Rail clamps and storm anchors
- Anti-collision sensors
- Radio remote control
- Operator cabin
- Travel warning lights and sirens
- Spreader beams
Supported from commissioning onwards
Our own teams install and service LiftoMech cranes, so responsibility stays with one supplier.
Application review
Load, span, duty and building data reviewed by our engineers.
Design & manufacture
Drawings for approval, fabrication and stage-wise inspection.
Installation & testing
Erection, alignment, load test and handover documentation.
Service & AMC
Preventive maintenance, breakdown support and spares.
What is the difference between a goliath and a gantry crane?
Are your gantry cranes suitable for outdoor use?
Can gantry cranes be relocated?
Do you supply cranes for infrastructure casting yards?
Enquire about Goliath & Gantry Cranes
Share as much as you know. Our sales engineers will review your application and respond with a suitable configuration and quotation.
Thank you. Your enquiry has been received.
Our sales engineering team will review your requirement and get in touch within one working day. For urgent requirements, call Sales on +91 91300 28066.
Demo mode: no form backend is connected yet, so this submission was not sent. Configure FORM_ENDPOINT in assets/js/site.js — see DEPLOYMENT.md.
Explore other lifting solutions
Single Girder EOT Cranes
Space-efficient overhead cranes for light to medium duty lifting in workshops, assembly lines and warehouses.
View Details
Double Girder EOT Cranes
Heavy-duty overhead cranes for higher capacities, longer spans and demanding duty cycles — up to 75 t and 35 m.
View Details
Jib Cranes
Pillar and wall-mounted jib cranes for localised lifting at workstations, machine tools and loading points.
View Details