Single Girder EOT Cranes
Space-efficient overhead cranes for light to medium duty lifting in workshops, assembly lines and warehouses.
- Duty class
- Up to M7*
- Max span
- Up to 35 m*
- Controls
- Pendant / Radio
* Company maximum; actual configuration depends on capacity and application.
What is a single girder EOT crane?
A single girder EOT (electric overhead travelling) crane uses one bridge girder with an underslung electric hoist travelling along the bottom flange. It is a cost-effective, low-weight solution for light to medium duty lifting where headroom and building loads must be kept low.
LiftoMech single girder cranes are designed to the relevant Indian Standards and configured around your load, span, lifting height and duty cycle.
LiftoMech single girder EOT cranes installed across a warehouse bay
Where it is used
Typical applications and industries. Our engineers will confirm suitability for your specific process.
- Fabrication and machine shops
- Assembly and production lines
- Warehouses and stores
- Maintenance bays
- Tool rooms and die storage
- Light engineering units
Designed for safe, reliable lifting
Low dead weight
Reduces load on building columns and runway structure.
Economical design
Lower material and installation cost than double girder cranes for suitable duties.
Fast installation
Simple bridge and end carriage assembly shortens site time.
Easy maintenance
Accessible hoist and drives; standardised spares.
Smooth operation
Optional VFD drives for soft start and precise positioning.
Safety built-in
Limit switches, overload protection and emergency stop as standard.
Configured around your requirement
Every crane is engineered to order. These are the main choices we work through with you.
Girder type
Box girder or rolled section girder, selected by span and capacity.
Hoist
Electric wire rope hoist (standard or low headroom) or chain hoist.
Mounting
Top running on runway rails, or underslung from roof structure.
Controls
Pendant push button, radio remote, or cabin (where suitable).
Specification overview
Final specifications are confirmed in our technical offer, based on your application data.
| Parameter | Value |
|---|---|
| Lifting capacity | [Confirm] range |
| Span | [Confirm] range — company maximum 35 m |
| Lifting height | [Confirm] range / as per application |
| Duty class (IS 3177) | M3 – M5 typical; higher on request Configurable |
| Hoisting speed | [Confirm] single / dual / VFD |
| Cross travel speed | [Confirm] |
| Long travel speed | [Confirm] |
| Power supply | [Confirm] 415 V, 3 Ph, 50 Hz typical |
| Operating environment | Indoor / outdoor Configurable |
Standard components
Configured with components from leading international manufacturers, for reliable operation and readily available spares.
Geared motors and drive units for hoist, cross-travel and long-travel motions.
Helical and bevel gearmotors for smooth, high-duty crane travel drives.
Wire rope and electric chain hoists rated for standard and heavy duty.
VFDs, motors and contactors for precise crane speed control.
PLCs, HMIs and drives for crane logic, safety and remote control.
Switchgear, protection and panel components for crane power systems.
Options to suit your operation
Add safety, control and productivity features to match your duty and site conditions.
- Variable frequency drives (VFD)
- Radio remote control
- Anti-collision sensors
- Load display / overload indicator
- DSL or festoon power feed
- Warning lights and sounders
- Rain cover for outdoor use
- Maintenance platform
Supported from commissioning onwards
Our own teams install and service LiftoMech cranes, so responsibility stays with one supplier.
Application review
Load, span, duty and building data reviewed by our engineers.
Design & manufacture
Drawings for approval, fabrication and stage-wise inspection.
Installation & testing
Erection, alignment, load test and handover documentation.
Service & AMC
Preventive maintenance, breakdown support and spares.
What capacities are available for single girder EOT cranes?
When should I choose a double girder crane instead?
Can a single girder crane be installed in an existing building?
Do you provide installation and load testing?
Enquire about Single Girder EOT Cranes
Share as much as you know. Our sales engineers will review your application and respond with a suitable configuration and quotation.
Thank you. Your enquiry has been received.
Our sales engineering team will review your requirement and get in touch within one working day. For urgent requirements, call Sales on +91 91300 28066.
Demo mode: no form backend is connected yet, so this submission was not sent. Configure FORM_ENDPOINT in assets/js/site.js — see DEPLOYMENT.md.
Explore other lifting solutions
Double Girder EOT Cranes
Heavy-duty overhead cranes for higher capacities, longer spans and demanding duty cycles — up to 75 t and 35 m.
View Details
Goliath & Gantry Cranes
Rail-mounted cranes for open yards, precast plants and shop floors without overhead runway structures.
View Details
Jib Cranes
Pillar and wall-mounted jib cranes for localised lifting at workstations, machine tools and loading points.
View Details